BMW M3 3.2(E36) turbo motor for sale approximately 18,000 miles, never ran
$8,500
* 8.5:1 compression ratio completed with forged JE pistons and Crower
connecting rods, Raceware head studs and bolts, total seal rings, Elgin turbo
cams. Engine balance, blueprinted and assembled. Engine was never used
after build up.
$4,500
* BMW M3 (E36) performance cyclinder head ported and polished completed with
big stainless steel swirl polished racing valves, high performance valve springs,
titainium retainers, competition 7 angle valve job, blue printed and assembled
by BCE Racing heads in California. This head is needed to acheive the 550-
600 hp with the turbo setup.
$500
* Active Autowerke M3 (E36) 12 Flywheel - Brand New
$900
* Haltech E6A engine management system with complete manual - Brand new.
Paid approximately $1,600 for entire systems.
$3,000
* Active Autowerke turbo exhaust manifold set up to accept external
wastegate, wastegate pipe, Garret TO4E 60-1 turbo with 360 degree thrust
bearing, engine bracket, new intake turbo pipes with flange for HKS
sequential blow off valve, HKS sequential blow off valve, Active Autowerke
aluminium oil cap. All these parts are brand new.
$600
* Modified BMW M3 oil filter housing to accept external oil cooler, modified
M3 E36 pressure plate built to withstand 550-600hp.
E-mail me for pictures. (rblake@uniquesynthetics.com)
$8,500
* 8.5:1 compression ratio completed with forged JE pistons and Crower
connecting rods, Raceware head studs and bolts, total seal rings, Elgin turbo
cams. Engine balance, blueprinted and assembled. Engine was never used
after build up.
$4,500
* BMW M3 (E36) performance cyclinder head ported and polished completed with
big stainless steel swirl polished racing valves, high performance valve springs,
titainium retainers, competition 7 angle valve job, blue printed and assembled
by BCE Racing heads in California. This head is needed to acheive the 550-
600 hp with the turbo setup.
$500
* Active Autowerke M3 (E36) 12 Flywheel - Brand New
$900
* Haltech E6A engine management system with complete manual - Brand new.
Paid approximately $1,600 for entire systems.
$3,000
* Active Autowerke turbo exhaust manifold set up to accept external
wastegate, wastegate pipe, Garret TO4E 60-1 turbo with 360 degree thrust
bearing, engine bracket, new intake turbo pipes with flange for HKS
sequential blow off valve, HKS sequential blow off valve, Active Autowerke
aluminium oil cap. All these parts are brand new.
$600
* Modified BMW M3 oil filter housing to accept external oil cooler, modified
M3 E36 pressure plate built to withstand 550-600hp.
E-mail me for pictures. (rblake@uniquesynthetics.com)